If you are looking for an ultimate list of sheet metal tools, then you have landed on the right page. Working on the sheet metal, several sheet metal hand tools are used. Some of the most important hand tools used in sheet metal fabrications are listed below.
Sheet Metal Tools List
Snips: Snips are hand tools that are used for cutting sheet metals. There are 2 types of sheet metal snips (Straight Snips & Aviation Snips) both of which have been briefly introduced below:
- Straight Snips: These Snips have got straight cutting blades. Hence, they are used when sheet metal is needed to be cut in a straight direction.
- Aviation Snips: These Snips come with curved-shaped cutting blades. Hence, they are made use of whenever sheet metal is needed to be cut in a curved direction or circular form. You can’t use the same Aviation Snip for cutting a curve in both the left and right directions. In other words, the Aviation Snips that are used for cutting in the left direction, are different from the ones that are used for cutting the sheet in the right direction. Both of these types of Aviation Snips are differentiated by the colors of their handles. The Aviation Snips meant for cutting in the right direction come with a green-colored handle. On the other hand, the handle of the Aviation Snips that are meant for cutting a curve in the left direction possesses a red color.
Burring Tool: The next tool that we are going to include in our list of tools is Burring Tool. With the use of this tool, the burr from the edges and holes of the sheet can be removed.
Steel Rule: The Steel Rule is used primarily for measuring dimensions.
It is considered one of the most critical tools that are involved in the sheet metal fabrication process.
Half Round Stake: This sheet metal tool is used to press seam joints.
Scriber: Scriber is a tool made of steel wire and is useful for scribing lines on the surface of sheet metal. So it is a marking tool whose one end is sharp.
Hand Stake: Just like the “Half Round Stake” introduced above in this list, Hand Stake is also a type of pressing tool. It is mainly used for pressing the inner sides in straight joints.
Grooving Stake: In case, there is a need of producing grooves in sheet metal while performing the fabrication process, Grooving Stake makes it possible. With the use of this tool, grooves can be created in various sizes.
Divider: A Divider is used for scribing circular/curved profiles on sheet metal.
Trammel Points: This tool is used for scribing or drawing circles or big arcs on the sheet metal. That’s because drawing such circles or arcs is not possible with the use of a divider.
Centre Punch: Whenever there is a need for marking a specific point in a sheet, you can make use of Centre Punch for performing this task. As the name itself indicates, this tool is also used to mark a hole’s center point before that hole is created by drilling.
The angle of the sharp end of a Centre Punch is generally 90 degrees.
Files: A file is a tool that is used for removing extra material from sheet metal by abrasion. It comes under the category of cutting tools.
Ball Pean Hammer: It is a kind of hammer used to shape sheet metal by hammering it. Ball Pean Hammer has a round head and curved face.
Prick Punch: This is another tool in the category of marking tool, which comes in handy when a center position is to be marked for dividers.
The angle of the sharp end of a Centre Punch is generally 30 degrees.
Taper Stake: This is another tool in our sheet metal hand tools list and is used for the purpose of rounding in tapered jobs.
Mallet: It is a plastic or wooden tool that looks similar to a hammer. It is used for providing a polite & smooth effect on the sheet metal sheet by applying a light force without causing any damage to the sheet’s surface.
Riveting Hammer: It is another kind of hammer and is used with the purpose of riveting sheets.
Raising Hammer: This hammer is useful in transforming a flat sheet into a curved-shaped sheet.
Important Note: Below I have recommended two great books related to sheet metal. Click on the below-given images to check their price and other details on Amazon.
So that’s all in Sheet Metal Tools List. I hope you have read the list thoroughly. If you have any doubt, you can ask in the comments below. I will be happy to assist you.
Also, read the articles whose links I have mentioned below:
